agriculture

Pressure Regulators

1 1/2"

3/4"

3/4" Low Flow

3" x 10

2" x 6

Pressure Regulators are manufactured with non-corrosive, high quality plastic and brass, that withstands all fertilizers and chemicals in common use providing years of trouble-free operation. The one-piece sealed regulating unit – different for each pressure option – is field replaceable and easy to maintain. Available in several sizes, pre-set pressures, and flows from .25 to 175 GPM.

Product Advantages

  • Instant response to variations in pressure assuring that outlet pressure will remain constant regardless of inlet pressure.
  • Non-corrosive, high quality plastic and brass bodies withstand commonly used fertilizers and chemicals.
  • Sealed regulating unit with stainless steel spring and a screw are field replaceable and easy to maintain.
  • Built-in operating indicator visually shows when proper outlet pressure is achieved (except 3/4″ low flow).
  • Flow ranges from .25 to 175 GPM

Applications

  • For use in drip and sprinkler irrigation systems.

1 1/2"

3/4"

3/4" Low Flow

3" x 10

2" x 6

Pressure Regulators Technical

Specifications

  • Maximum Operating Pressure: 145 psi
  • Available Pre-Set Pressures: 9, 12, 15, 20, 25, 30, 35, 43, 50, 57 and 65 psi
  • 3/4” Low Flow Pre-Set Pressures: 15, 20, 25, 35 and 42 psi
  • Connections:
    • 3/4” – Female x Male Threaded
    • 1 1/2” – Male Threaded
    • 2” x 4 – Male Threaded
    • 2” x 6 – Female Threaded
    • 3” x 10 = Female Threaded
  • 3/4” Low Flow Connections: Inline Female x Female Threaded
  • 3/4” Low Flow Pressure Regulator: Sealed unit is non-replaceable

Pressure Regulating Unit

  • Quick and simple to change pressures
  • One-piece sealed pressure regulating unit for each pressure option
  • Pressure regulator body remains the same
  • No spring colors to remember

Example :

  • Given Flow Rate = 63 GPMNominal Required Pressure = 20 psi
  • Using Pressure Regulator Model 2” x 6 will result in 10.5 GPM per regulating unit.
  • 10.5 GPM per regulating unit will result in an output pressure of 18 psi. (See chart at right)
  • Headloss of 2” x 6 Pressure Regulator at 63 GPM is 5 psi. (See chart at left)
  • Design pressure at inlet of Pressure Regulator should be 18 + 5 = 23 psi

1 1/2"

3/4"

3/4" Low Flow

3" x 10

2" x 6

Pressure Regulators Ordering

1 1/2"

3/4"

3/4" Low Flow

3" x 10

2" x 6