Iron Valves

Iron Valves are available in a wide range of sizes and flow rates to cover most applications. The unique design allows a straight flow pattern with low friction loss. A direct sealing diaphragm, the valves only moving part, operates by pipeline or external pressure. Sizes range from 1″ to 24″ with a variety of control functions and connection options.

Product Advantages

  • Unique design allows a straight flow pattern with lowest friction loss in the industry.
  • Superb hydraulic performance with low operating pressure.
  • Direct sealing diaphragm for positive opening and closing.
  • Simple inline installation with minimal parts provides low maintenance requirements.
  • Iron valves have protective polyester coating for resistance to corrosive elements and UV protection.
  • Bronze valves are designed to resist cavitation where extreme flow velocities exist.


  • Excellent for high pressure applications
  • For drip and sprinkler irrigation systems
  • Center pivot control
  • Permanent systems


Iron and Bronze Valves Technical


  • Optional Functions: Manual, Electric, Pressure Reducing, Pressure Sustaining, Hydraulic Remote Control, Quick Relief, Flow Control, Surge Anticipating, Float Control and more
  • Maximum Water Temperature: 176° F
  • Connections: Threaded ANSI NPT FemaleGrooved ANSI/AWWA C-606Flanged ANSI CL-125


  • Body and Bonnet: Cast Iron (ASTM A 125 CLB)
  • Spring: Stainless Steel (AISI 302)
  • Nuts, Bolts, Washers: Stainless Steel (BS 5216)
  • Diaphragm: Natural Rubber

Netafim Basic Valve Manual Operation

The basic valve can be operated manually through the use of a 3-way selector. Selector options and their functions include:

(C) CLOSED Upstream pressure or pressure from an external source is applied to the control chamber. Initiated by the spring, the diaphragm is pressed down to close the valve drip-tight.

(O) OPEN Relieving the water or air pressure to the atmosphere from the control chamber causes the valve to open.

(A) AUTOMATIC The automatic port of the 3-way selector is connected to a solenoid, hydraulic relay or pilot, which controls the valve. The common port of the 3-way selector connects the control chamber to either A, O, or C, depending on the direction the selector is pointed.