None - No output module will be installed, but the meter will be configured for the most common pulse output resolution for the chosen Units, incase a user wants to add a pulse module later on.

Pulse, Default - This is the most common pulse output module. It requires no external power and provides two output signals with a shared common. This module should NOT be used if you need to connect the meter to two different reading devices

Pulse, Dry Contact - This module is used with Motorola controllers and some PLC's that will not accept a transistor (open collector)style output, and can also be used to connect the meter to two different reading devices. This module should not be used if fast pulses are desired. Requires an external 5-35vDC power source.

Pulse, Solid State - This module is ideal for connecting a meter to two different reading devices and can be used if fast pulses are desired. Requires an external 5-35vDC power source.

Analog, 4-20mA - This module is typically used when interfacing with VFD's (variable frequency drives that control the speed of a pump) or fertilizer injection platforms. 4mA is always 0 flow, 20mA is programmed to the Safe Max Flow value on the meter LCD and varies by meter size and units of measure. Requires an external 12 or 24vDC power source.

Modbus - This is an experimental module and is typically used with PLC's. Rather than sending out pulses or an analog signal, this module allows a device to ask questions, to which the meter will respond. Has a built-in battery but should be powered by 12 or 24vDC.

Water Meter Configurator