Series 80 Nylon Control Valves
Features & Benefits
- Easiest Operation And Lowest Maintenance Costs
New and improved manual selector allows for hassle-free internal bleed without manipulating the position of the solenoid. Innovative labyrinth inlet eliminates the need for internal filters, reducing service costs for end users, contractors and Distributors. - Flow Control Standard On All Models
Manual zone control from fully closed to maximum capacity at no extra charge - High Efficiency, Longer Lasting Solenoid
Inrush and holding current are 50-60% lower than the industry average which allows the industry’s longest wire runs from valve to controller. Low sensitivity to dirt and voltage fluctuations. - Proven Reliability with Reclaimed Water
Over a decade of field-proven, consistent performance under the harshest water conditions. Durable and corrosion-resistant materials. - 2-Wire System Compatibility
Works with all major manufacturer 2-Wire control systems.
Applications
- Residential or commercial landscape irrigation applications
- For mild corrosive and mild acidity levels in the water
- For remote control, master valve, automated operations
- Reclaimed/reuse applications including municipally treated reclaimed water designated for irrigation
Series 80 Nylon Control Valves Technical
Specifications
- Recommended flow range:
¾” – 0.01 to 26 GPM
1” – 0.01 to 44 GPM
1 ½” – 0.25 to 110 GPM
2“ – 0.25 to 176 GPM - Minimum operating pressure: 7 psi
- Maximum operating pressure: 150 psi
- Water temperature: up to 140° F
- Improved manual selector and encapsulated solenoid available on 3/4” and 1“ models only
- 24VAC solenoid standard +/- 10% voltage
- Solenoid inrush current: 0.220A
- Solenoid holding current: 0.095A
- Optional Solenoids: 24VDC, 12VDC, 12VDC-latching and 120VAC
- Integral stainless steel EasyClean® filter for 1½” and 2” models only
- Adjustable pressure regulator option available: 1.5″ and 2″ model
- Normally Closed Option: 3/4″ – 2″
- Normally Open Option: 1 1/2″ – 2″
Materials
- Body, bonnet, and glass reinforced polyamide (GRP)
- Diaphragm: Buna-N rubber
- Nuts, bolts and washers: stainless steel 304
- Spring: stainless steel AISI 302